Table of Contents

Queries do not work like Google, Yahoo, and other search engines where you can use multiple words in a single field and get related results. Though the results will be different, every Query screen will have the same buttons and options for building and saving the search.  The part that changes is the data being searched for within the record.

• A query is a custom search for details about records in AiM.

• After executing a query it will display a "Browse" list of all the records that match the different search elements.  

• Queries can be built for a single search or saved for future use.

• Queries can be shared with other people or groups of people.

• Saved Queries can be made into a Dashboard Widget and shared with a group.

• Saved Queries can be used for Highcharts. These are visual displays of the results in the form of a chart or graph.  These charts can be added to Dashboard Widgets.

• There is no limit. If the data is in the system, you can query it!

To navigate to a query screen, from the WorkDesk, click on any module in the left hamburger icon Menu. You will find additional left menu options, some of which have a magnify glass icon next to them.

Click on a magnify glass icon next to your menu choice for which you would like to create a query for.

These three buttons can be found at the top-left of a query screen:

• Execute - Runs the query

• Basic Search/Advanced Search - This is a toggle. The button will show which option you WILL switch to by clicking it, NOT which option you are currently on.

• Reset - Resets the entire query screen. This is useful when your search results appear to be wrong. You can click Reset and start over knowing all fields have been reset to their default settings.

Below is a screenshot of the search page for Asset Package, under the Asset Management module. Under Action in the left menu, you will find the link to open and begin creating a New Query.

Below Action, View will be empty until the Query has been saved.

A query screen can include multiple tables. The Primary Table is listed first. After that, each additional table will have its own Heading Bar. If the header is indented, the table is subordinate to the table above it.

In the screenshot below, the Notes Log table is a Subordinate Table to the Primary Table (which is always the top-most table of a query screen).

Subordinate Tables will either have the Display Order column and its sort options, or the Header Operations (Operator dropdown list next to the header). It cannot have both.

The Subordinate Tables without the Display Order column options cannot be displayed in the final query results.

In the screenshot below, the red boxes highlight the display order column fields. The green boxes highlight where the display order column fields are missing, and there is an operator dropdown list next to the header for those tables, instead.

Both display order and header operations are described later in this tutorial.

From your WorkDesk, click on the hamburger icon on the left to expand your top-most search options/how you want to start your search.

Summary of the screenshot, below:

• The Module - The top level category of records

• The + Sign - Starts a New Record

• The Magnify Glass - Takes you to the Query screen where you can create a new query or edit existing ones

• The Record Name (under the Module) - Takes you to a new blank screen on that record level. (From there, you can also access the Query screen by clicking on the Search button in the record screen).

This is what the screen looks like when you click on the Record Name (under the module). The Record Name can be found at the top: In this example, Personal Query is the record name.

Click on Search to dive deeper into this screen.

Below is the Query screen, after clicking Search on a Record. Some primary features of this screen include:

• Execute - This will run the query.

• Basic/Advanced Search - Toggling between the two options will show which option you will go to, NOT which option you are currently on.

• Reset - Resets the entire query screen to defaults

• Action > New Query - Under the Action menu on the left, click on New Query to start a new query.

This is the query screen of a record. To start a new query, click on New Query under Actions in the left menu.

• In the New Query screen (screenshot below), first complete the Title field. The Description field below it is optional.

• When Query Listing and Query Count are set to Yes, the Query can be displayed on the Dashboard.

• Setting the yellow and/or red flag fields will make the query flag turn yellow or red on the WorkDesk or when it reaches the set number. These fields are optional.

• Module - The module section displays the screen from which the personal query will be based.

• Chart Type (aka the AiM IQ embedded reports section/block) - Identifies the different charting options to display a visual representation of the data you are about to build a query for.

• When you are finished and click on Done, the search will open in build mode.

After all criteria are entered, click Save to save the query.

Selecting Execute in the following screen will take you to the Query Results/Browse View of the query.

In your query search results, click on a Record link to display the details of that record.

Or, you can click the blue Search button to return to the Query screen (second screenshot, below) on the record level under the module you chose (in this example, Personal Query).

Before we saved a query, the only option under Action was New Query. Now, Edit Query has been added.

Under View, there were previously no options. But after saving 1 or more queries, those saved queries are listed under this section.

From the WorkDesk, click on the hamburger icon on the left and click on the System Administration Module

Click on the Magnify Glass icon next to Personal Query

In the next screen, click Execute to view all your Personal Queries, across all modules.

You will see a list of your personal queries (example screenshot, below).

Click on one of the Query links to open that page. Here, you can Edit the chosen query and share the query to group(s).

Display Order is a functionality of the Query screen that allows you to set the order of the columns of information that will show up in the search results screen.

By default, each query will display a set of predetermined fields. These can be overridden by placing numbers in this box. Once a number is entered, only numbers with values entered will be displayed.

It’s best to start with numbers like 10, 20, 30, etc. to allow other elements to be added in between without having to renumber other fields. Consecutive numbers are not required. All of this is explained in more detail later in this section.

Here, we’ll start with a basic search query to walk through the details of using the Display Order feature.

From your WorkDesk, select the Module under the Menu to perform a search. In this example, Work Management is selected.

In the screen for the Module you selected (in this example, Work Management), under Menu, select Phase by selecting the magnify icon.

Or if you clicked on the word Phase instead of the magnify icon, in the next screen, click on Search.

You can toggle between Basic Search and Advanced Search. Basic Search will not allow you to sequence the way the phase search results are displayed (explained in Step 5, Display Order). 

The Display Order column allows you to sequence the search results, displaying the columns of data in a specific order.

In this example, we want the columns of data in our search results to be presented in this order: Work Orders, Phase, Phase Description, Status, and Shop.

[Display Order - 5] Displays the Work Order number first/in the 1st column of our search results because 5 is the smallest number we enter in a Display Order field for this search. Typically all that is needed in a search at the work order level is the work order number. 

[Display Order - 10] Display the Phase number next/in the 2nd column of our search results because 10 is the 2nd smallest number we enter in a Display Order field.

[Display Order - 20] Display the phase Description.  The phase Description will show up in the 3rd column of our search results because 20 is the 3rd smallest number entered in a Display Order field for this search.

[Display Order - 30] Displays the Status in the 4th column.  Select the operator to make the search more meaningful. In this example (below) Closed, Closing, Incomplete, Deferred, and Complete - Pending R are excluded by changing the Operator to not in.

[Display Order - 40] Displays the Shop in the 5th column. Select the shop desired for the search. In this example, Electrical is the shop search.

When done select Execute.

Notice the display order of the columns follows the sequencing that was added to the Display Order fields.

Under the Action menu, the search can be exported to Excel by clicking on Export.

In addition to the ability to set the column Display Order using numbers in the designated fields, another part of the Display Order feature includes the ability to select between Ascending (Asc) or Descending (Dsc). This will determine the order of the rows of data included in a column.

In the example below, the Status is set to be sorted in descending order, starting with “New.”

Searching for a Work Order with the Value, 12345, this is the value used by the operator to determine if a record will be included in the query results or not.

Here (screenshot) is a standard list of Operators that can be applied to most rows of your search criteria. The selected operator applies to the value entered in the column after it.

The logical operators (=, >, <, >=, <=, <>) work as expected.

Starts with and Ends with work by looking for the value at the beginning or end of a value entry. Contains looks for the value anywhere in the data element. In and not in asks for records where a specified data element is either in or not in them.

The operators for Edit Date (screenshot below) ask the query to pull records that meet the specified date criteria. Operators unique to date criteria include: Between, Older than, Last, Within, Next and Newer than

With some data elements, you can look to see if the element is empty (Null) or has something/anything in it (Not Null).

Referencing the screenshot above,

Null would return all projects in a Phase that does not have the Project filled in. Do not type in the search field, it must be blank.

Not null only returns records with populated Problem Codes. The search field can be left blank to return all records that have anything entered for the Problem Code, or when specified in the field, returns only records that have been entered.

The column search qualifier is one of the more powerful operators that compares two different databases.

A column operator could be set to a column search qualifier (e.g., = column, > column, < column, >= column). When that happens, the compare to column options become available.

Examples:

My Total Estimate is = to my actual total (the = populated an additional column with selection choices) as a comparison.

Show me all Work Orders when my Estimated Total is less than My Actual (You are looking for an overrun estimate).

In the example below, from the work order search screen, phase costs section, selecting the >column operator for Actual Total searches for all phases where the Actual Cost has exceeded the Estimated cost opens a list of other common fields for comparison. In this case, Estimated Total.

Below, you will see the Cost Analysis for the Phase. If you had multiple Work Orders, the cost analysis of this would level up on this phase.

Below, the user operator returns all records created by whoever is logged in at the time.

User defined fields create additional customized reporting and management capabilities.

The in and not in operators allow you to specify one or more values to include or exclude.

• In - The Facility in the admin building and Property in Gardens

• Not in - The Project not in the lobby and Problem Code not in Too Hot-Zone 1

The search qualifier, between. The fields must be within the listed range (date and numeric fields only).

Below are two example settings for search qualifiers newer than or older than.

• Record returned must be more recent than 1 day ago.

• Record returned must be older than 1 week ago.

Below are two example settings for search qualifiers last or next

• Return records for within the last 1 month (from today’s date)

• Return records with desired completion date in the next 5 days (from today’s date)

The field must be within the listed time frame, within 1 day from the current date.

Table Headers (other than the Primary/top Table) can also have a drop down menu of operators. The example below shows the Notes Log header operators.

Select - This is the default value. With Select, any criteria selected from this section acts just like the criteria in the Primary Table.

Not Exists - The only records returned will be those where there is no record from this subordinate table. For example, when searching for Work Orders and you select Not Exists for the Notes Log, you will get Work Orders that don’t have any notes.

Exists - This is the opposite of Not Exists. So, for the example above, the search will return any Work Orders that have a Notes Log record.

Match All - With Match All selected, only records where all the records on this subordinate table are selected will be returned. An example of this would be for a Work Order query where the Phase is set to Match All and a Shop is selected. The only Work Orders returned will be ones where ALL the Phases have a specific shop.