Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

OVERVIEW

The following program will apply to any potential exposure to lead, including but not limited to the removal of paint by any University of Oregon employee unless testing has shown that the surface does not contain lead or the building was built after 1978.  Potential lead exposure from sources other than lead-based paint will also cover employees.  This written program will be available to any employee upon request.  It is expected that any contractor working for the University of Oregon will be in compliance with the OR-OSHA program and perform work in a manner to minimize exposure to university employees, students and visitors.  


For more information visit https://safety.uoregon.edu/building-environmental-science-team

Note

Following these standards and procedures will help protect employees from lead exposure.  Additionally, this program is designed to assure that the University is in compliance with Oregon Occupational Safety and Health rules 1910.1025 for lead.   
Departmental - Departments will be responsible for carrying out the Lead Exposure Protection Program in accordance with this written program, including associated expenses of air and medical monitoring.  

Role and Responsibilities:

Employees - Employees will be responsible for complying with procedures established by their supervisors to minimize potential lead exposure and inform their supervisor if they have health concerns that may be pertinent to lead exposure so the supervisor can arrange for appropriate consultations for the issue.  
Environmental  Health and Safety (EHS) - EHS will be responsible for administrating and managing the lead exposure program, assisting departments in evaluating potential lead exposures, reviewing medical history of employees with potential lead exposure, consulting with the contract Occupational Health Physician, coordinating necessary environmental testing, and conducting periodic workplace inspections to ensure the program is working effectively.      
Supervisor - Supervisors will be responsible for identifying potential employee exposures to lead, developing standard operating procedures for routine work to comply with the UO written program, scheduling air monitoring with Environmental Health and Safety (EHS), scheduling employees for necessary medical testing, and informing EHS of employee health concerns with potential exposures to lead. 
University Health Center -  The University Health Center is responsible for conducting or arranging medical examinations of employees when necessary and advising EHS of the health of employees evaluated for potential lead exposure.  
Method of Compliance Expand

Allowable Airborne Exposure Levels:

  No University employee shall be exposed to airborne lead concentrations greater than 50 micrograms per cubic meter of air (50 ug/m3) averaged over an 8-hour workday.  If an employee is exposed to lead for more than 8 hours in any workday, the allowable exposure level shall be reduced for that day as follows:

Allowable exposure level in ug/m3 equals 400 divided by the hours worked that day.  For example, a 10-hour shift would have an allowable exposure of 400/10 = 40 ug/m3.  These levels are established regardless of whether an employee is wearing a respirator.  
  • OR-OSHA has established 50 ug/m3 as the permissible exposure limit (PEL) and 30 ug/m3 as the action level (AL).  Exposures at or above the PEL mandate additional precautions to be taken to protect the worker.  Exposures at or above the AL but below the PEL require the supervisor to take measures to avoid reaching the PEL.  If a project/job creates airborne lead levels exceeding 50 ug/m3, the work will be contracted out to a firm experienced in removing lead-based paint.  
      
  • Exposure Monitoring:

    Supervisors will identify jobs that will create airborne lead levels and contact EHS to arrange air monitoring for the purpose of determining initial exposure and developing future criteria for this written program.  Monitoring will include documentation of the job, weather conditions, temperature, air movement, and note as much information as possible regarding engineering controls, work practices, type of coating, and removal process.  Data will be collected until an adequate amount of data is acquired to make a determination of the type
    of
    exposure, if any, which is occurring with specific jobs.  Employees involved in the monitoring will be required to comply with these guidelines. 
     Results from the monitoring will be shared with the involved
    employees
    .   
    If a job is found to exceed the Permissible Exposure Level (PEL), that job type will be suspended until controls (engineering and/or administrative) have been put into place to reduce the exposure level below the PEL. 
     
  • Post-job dust sampling may be done to assure adequate cleaning of the area or to determine potential hazards. 
     
  • These results will determine if additional monitoring is necessary.  
  • Engineering Controls:

     In all cases, engineering controls will be viewed as the preferred method of controlling the potential hazard.  The work environment will be separated from the rest of the building environment when necessary.  This will vary from project to project and may include protections such as shutting off ventilation systems, creating barriers to separate the work area, or working during shifts when the building is not normally occupied.  

    • Engineering controls will also be considered in terms of how to minimize the exposure to workers to a level as low as possible and preferably below the action level.  This should be accomplished by analyzing each task to determine what feasible controls are available and notifying EHS of those controls that could be incorporated into this written program. 

    Work Practices: 

    Each job should be
    evaluated
    to determine the method which will create the least amount of potential exposure.  Standard operating procedures will be prepared by the department or supervisor that describe work practices to minimize airborne dust for the specific hazard.  Certain practices may be prohibited when air monitoring suggests the PEL will be exceeded. 
     
    Respiratory Protection:

      Respirators will be used when a potential for lead exposure exists.  Prior to issuance of a respirator the employee must be entered in EHS's Respiratory Protection program.  In almost all cases, half-mask, air-purifying respirators with high-efficiency filters will be issued.  Qualitative fit tests will be performed at the time of initial fitting and annually thereafter.   

    • All employees using respirators will have gone through EHS's respiratory training program and will follow the University's written Respirator Protection Program. 
       

    Protective Clothing:

     Protective clothing will be provided by the department
    for
    employees with the
    potential
    for lead exposure at or above the AL, or where a possibility for eye or skin irritation exists.  Protective clothing shall include, coveralls or equivalent, and may include gloves, hats, and disposable shoe coverlets as well as any other necessary protective clothing to perform the necessary job.  Workers must remove contaminated clothing prior to leaving the worksite.  
    • Disposable clothing will be disposed of as frequently as necessary but used for no period greater than one week.  Non-disposable clothing shall be laundered by the University on a basis no greater than weekly. Contaminated clothing will be put in plastic bags to be stored in a closed container labeled as follows:    
      "CAUTION:  CLOTHING CONTAMINATED WITH LEAD.  DO NOT REMOVE DUST BY BLOWING OR SHAKING.  DISPOSE OF LEAD-CONTAMINATED WASH WATER IN ACCORDANCE WITH APPLICABLE LOCAL, STATE OR FEDERAL REGULATIONS. "
       
    • Notification that the clothing was potentially contaminated with lead will be made to the person or company responsible for the laundry when non-disposable clothing is used.  This notification will be done by the person arranging for the laundry.  Copies of the notification must be kept on file for review. 
       
    • Employees will be instructed to remove contaminated clothing before leaving the worksite. 
       
    • Disposable clothing shall be disposed of properly.  
       

    Housekeeping:

     In jobs creating dust, such as paint removal by sanding, workers will be required to clean the workspace once the sanding is completed.  This will include a minimum of vacuuming surfaces with a HEPA vac to the point where no visible dust remains.  HEPA filters will be disposed of through EHS.  HEPA filters will be replaced according to standard operating procedures that minimize the creation of airborne dust.  Damp mopping shall also be used to minimize dust.   

    In non-painting jobs, all surfaces will be maintained as free from
    lead
    accumulation as possible. 

    Hygiene Practices:

     Food and tobacco products will not be allowed to be present or consumed in the lead work areas.  Cosmetics may not be applied in the lead work area.   

    Employees shall wash their hands after working on a lead
    exposure
    project and shower if necessary
    .
     
     

    Medical Surveillance: 

     The University will institute a medical surveillance program for all employees who are or may have been exposed to lead at or above 30 ug/m3  (the OR-OSHA Action Level) for more than 30 days per year.  Medical surveillance will include offering the above employees biological monitoring in the form of blood sampling and analysis for lead and zinc protoporphyrin at least every 6 months; medical consultations for employees whose blood lead tests exceed 40 ug/100g, and employees who seek advise on reproduction concerns.  Employees whose blood lead levels exceed 40 ug/100g will be offered more frequent testing. 
    • Employees will be notified of biological monitoring results within five working days after the receipt of the results.  Those employees with blood lead levels exceeding 40 ug/dL, require medical removal with medical removal protection benefits. 
       
    • The University Health Center or their contracting physician will be used for medical examinations and consultations with EHS staff.  Blood testing will be done through Oregon Medical Labs (OML).  The University Health Center has been provided with a copy of the OR-OSHA regulations regarding lead. 
       
    • Employees hired into positions that will require potential exposure to airborne lead for 30 days per year or more, will be offered a medical examination prior to their initial assignment.   
       
    • In the event of questions among the EHS staff of the appropriateness of an exam or blood test, the OR-OSHA regulations and University Health Center will be consulted.  
    Medical Removal:

    In the event an employee's blood lead level exceeds the OROSHA standards of 40 ug/100 g, the employee will be removed from the lead exposure and other work shall be provided at the same pay rate as their usual position.  Blood testing will be conducted on a monthly basis following a removal until the blood lead level drops below 40 ug/100g.   The employees shall have two consecutive blood samples below 40 ug/100g before being returned to their regular duties.  The University of Oregon shall provide up to eighteen months of medical removal protection benefits on each occasion that an employee is removed from exposure to lead.  Medical removal protection benefits shall mean that the University shall maintain earnings, seniority, and other employment rights and benefits of the employee as though the employee had not been removed from normal exposure to the lead. 
     
    Employee Training: 

    Employees with potential exposure to airborne lead will be informed of the contents of Appendices A & B of OAR 437 Division 2, Subdivision Z (1910.1025).  It shall be the responsibility of the individual supervisors to notify EHS of the employment of a new employee or the new task for an existing employee that will require training and/or medical monitoring.  It shall be the responsibility of EHS to train or delegate the training of the new employee.    
    • Annual retraining is required for those employees subject to exposures at or above the action level or for whom the possibility of skin or eye irritation exist.   
       

    Signs:

      Signs will be posted on the exterior of worksites where workers may create a potential airborne lead exposure.  Worksites that will not exceed the PEL will have signs posted stating “AUTHORIZED PERSONNEL ONLY” at the entry to the worksite.  Authorized personnel for this purpose will mean workers who are working on the actual project or workers who are not working on the project and have a need to be at the location and have been trained on Appendices A & B of the OR-OSHA lead code and are following the University of Oregon's written program.  The final decision of who is considered authorized personnel will rest with EHS.   

    • In worksites where it is anticipated that the PEL will be exceeded, a sign reading 
      “WARNING, LEAD WORK AREA, POISON, NO SMOKING OR EATING” shall be posted.   
       

    Recordkeeping: 

    EHS will maintain all records related to lead exposures. These forms will include the date, number duration, and location of each sample as well as a description of the sampling procedure.  They will also include the type of respirator worn, the name, social security number, and the job classification of the employee monitored.  Any environmental variables that could affect the results will also be noted on these forms.  These records will be maintained 40 years or for the duration of employment plus 20 years, whichever is longer. 
     

    • Medical surveillance records will include the employee’s name, social security number, and a description of the employee’s duties.  Any written opinions from the physician will be included as will any air monitoring results which were requested by or furnished to the physician.  In addition, employee medical complaints will be included.   
       
    • EHS will keep a copy of any medical examination results released to the University as well as any written work history which was presented to the physician and a copy of biological monitoring results.  EHS will insure that OML keeps records of the description of the laboratory procedure and a copy of the standards used to interpret the test results.  These records will be maintained 40 years or for the duration of employment plus 20 years, whichever is longer.  Departments will be responsible for notifying EHS of persons who should be included in the medical surveillance program. 
       
    • If medical removal should be required, records of the employee’s name, social security number and dates of removal shall be maintained.  A description and statement of the removal will be included.  
       
    • Records will be made available to OR-OSHA when requested.  Medical removal and medical records will remain confidential except where required to be released by federal or state law.  Employees may have access to their file upon request. 
       
    • Prior to the disposal of any of these records after the prescribed time, the University will notify the Director of OR-OSHA and will transfer those records to the Director upon request. 
       

    Environmental Monitoring Observation:

    Any employee or their designated representative may observe any monitoring of employee exposure to lead.  Employee or their representatives should notify EHS of their interest in observing monitoring and EHS will make arrangements at the earliest opportunity.  Any observer will be required to comply with this written program. 
     

    PLAN REVISIONS 
    Revisions will also be made as required by OR-OSHA regulations. 

    Lead-based Paint Removal Procedures

    Equipment and Supplies 

    Expand
    • High Efficiency Particulate Air Vacuum (HEPA VAC)
    • Respirator with HEPA cartridges
    • Warning signs and construction tape
    • Disposable coveralls with hood and booties
    • Disposable rubber gloves
    • Polyethylene (6 mil)
    • Polyethylene disposal bags (to be used only when not able to get LEAD CONTAINERS from EH&S)
    • Duct tape (2 inch)
    • Disposable cleaning rags

    Exterior Paint Removal 

    Expand
    •  Post signs approximately 20 feet from work area to prevent entry of personnel not working on the project and not wearing protective clothing and respirators.
    • Place a drop cloth of Polyethylene (Poly) on the ground directly under the area of the paint to be removed.  Place it securely to the ground to ensure that no lead dust or chips get under the Poly.
    • If feasible seal off the work area from the rest of the building with a Poly barrier.  It may be necessary to seal off vents, windows, doors, etc. to prevent dust migration throughout the building.
    • Exposure monitoring may be performed if sufficient historical data has not been gathered. Exposure monitoring is the responsibility of the Office of Environmental Health and Safety, (supv. to schedule in advance).
    • Don proper protective equipment prior to any disturbance of lead paint.
    • Remove paint using the HEPA vac to clean any debris as you remove.  Do not wait until the job is completely finished, clean as you remove.
    • After removal clean all surfaces of visible dust with the HEPA vac and wet wipe the area thoroughly.
    • Clean all contaminated tools and equipment by wet wiping.
    • When complete, place all paint chips and or dust/debris in containers provided by Environmental Health & Safety Dept.  Thoroughly clean all poly drop cloths of visible dust and debris and dispose of as regular waste.

    FORMS

    View file
    nameCPFM-0049_Lead_Exposure_Protection_Program.pdf
    height250
    View file
    namesafety_sheet_-_lead.pdf
    height250
     


     



    CONTACT US



    CONTENTS

    Table of Contents
    minLevel3